Cosmetic Bottles main containers usually include: plastic bottles, airless bottles, etc .;



First, plastic bottles

1. Plastic bottles are usually made of PP, PE, K, AS, ABS, acrylic, PET, etc. (Ningchuan Packing Thick Bottom Thick Wall PET / PETG Plastic Injection Blow Bottle)

2. It is usually used for cosmetic bottles with thick walls such as cream bottles, caps, stoppers, gaskets, pump heads, and dust covers; injection molding is used for PET blowing bottles, injection molding is used for tube blanks, and finished product packaging. For blowing bottles. Others, such as emulsion bottles and wash bottles with thin walls, are blown bottles.

3. PET material is an environmentally friendly material, with high barrier properties, light weight, unbreakable characteristics, chemical resistance, and strong transparency. It can be made into pearlescent, colored, magnetic white, and transparent. It is widely used in the installation of gel water. With the development of Internet marketing and being independent of transportation and cold and freezing weather, thick-walled PET bottles have been widely used in the packaging of water and milk products for daily chemicals. The mouth of the bottle is generally 16 #, 18 #, 22 #, 24 #, etc. It can be used with a pump head or a cap.

4. The acrylic material is an injection bottle, which has poor chemical resistance. Generally, the paste cannot be directly filled. It needs to be equipped with a liner barrier. The filling is not easy to be full, preventing the paste from entering between the liner and the acrylic bottle. In order to avoid cracks, the packaging requirements are high during transportation, because it looks particularly obvious after scratching, has high permeability, and has a particularly thick upper wall, but the price is quite expensive.

5, AS, ABS: AS transparency is better than ABS, and toughness is better.

6. Mold development costs: Blow molds range from 1,500 yuan to 4,000 yuan, injection molds range from 8,000 yuan to 20,000 yuan. The stainless steel material used in the mold is more expensive than the alloy material, but it is durable. The demand for production volume, if the production volume is large, one or four molds can be selected, and the customer can decide by himself.

7, the order quantity is generally 3,000 to 10,000, can be customized colors, usually do the primary color matte and magnetic white, or add pearl powder effect, although the bottle and cap with the same color mother, but sometimes due to the bottle and cap The materials used are different, and the colors displayed are slightly different.

8. The silk screen has ordinary ink and UV ink. The UV ink has better effect, has gloss and three-dimensional sense. It should be printed to confirm the color during production. The silk screen effect in different materials will be different.

9. Hot stamping, hot stamping and other processing technologies are different from gold stamping and silver powder effects. Hard materials and smooth surfaces are more suitable for hot stamping and hot stamping. Soft surfaces are not good for hot stamping, easy to fall off, and the gloss of hot stamping silver. Degree is better than printing gold and silver.

10. The screen printing film should have a negative film, the picture and text effect should be black, the background color should be transparent, and the bronzing and silvering process should be a positive film, the picture and text effect should be transparent, and the background color should be black. The text and pattern ratio cannot be too small or too thin, otherwise the effect will not be printed.

11. Bottle caps are generally equipped with inner gaskets, pull caps and inner plugs. Very few are equipped with small spoons or droppers. This is mainly due to their tightness and ease of use.


12, the production cycle is relatively moderate, about 15 days cycle, silk screen cylindrical bottles for single-color calculation, flat bottles or special-shaped bottles are calculated as two-color or multi-color, usually the first screen printing screen printing fee or fixture fee, screen printing The unit price is generally 0.08 yuan / color time to 0.1 yuan / color time, the screen version is 100 yuan to 200 yuan / section, and the fixture is about 50 yuan / piece.



Distributor / pump head

1. The dispenser is divided into two types: bar mouth type and screw mouth type. From the perspective of function, it is also divided into spray, foundation cream, lotion pump, aerosol valve, and vacuum bottle.

2. The size of the pump head is determined by the caliber of the matching bottle. The spray size is 12.5mm-24mm, and the water output is 0.1ml / time-0.2ml / time. It is generally used for packaging perfume, gel water and other products. The length of the same takeover can be determined according to the height of the bottle body.

3. The specifications of the emulsion pump are larger from 16ml to 38ml, and the water output is 0.28ml / time to 3.1ml / time. It is generally used for cream and washing products.

4. Special dispensers such as foam pump heads and hand-closing spray heads. The foam pump head is a non-inflatable hand pressure pump head. It does not need to be filled with air to generate foam, and it can produce quantitative high-quality foam with only light pressure. . Usually equipped with a special bottle. Hand-held sprinklers are commonly used on products such as detergents.

5. The composition of the distributor is relatively complicated, and generally includes: dust cover, hoe, hoe, gasket, piston, spring, valve, bottle cap, pump body, suction tube, valve ball (steel ball, glass ball). Bottle caps and dust caps can be colored, can be plated, and can be covered with anodized aluminum rings. Because a set of pump heads involves more molds, and the order quantity is larger, the minimum order quantity is 10,000-20,000, and the delivery period is 15-20 days after the sample is confirmed. White and general-purpose models are often in stock.

6. Airless bottles are usually cylindrical, with specifications of 15ml-50ml, and individual 100ml. The overall capacity is small. It is based on the principle of atmospheric pressure, which can prevent cosmetics from causing pollution during use. The airless bottles have galvanized aluminum, plastic plating and non-ferrous. Plastic, the price is more expensive than other general containers, and ordinary ordering requirements are not high.

7. Distributor customers rarely open their own molds, pay more molds, and have higher costs.



Ningbo RUICHANG Commodity Packaging CO , Ltd . is a professional China manufacturer and supplier of cosmetic bottles. Specializing in the production of lotion pumps, airless bottles, acrylic lotion cans, cosmetic cans, etc. Welcome to buy: https://www.ruichangpacking.com/