As the heat of home decoration continues to heat up, the changes in ceiling lights are also changing with each passing day. They are no longer confined to the previous single lights, but are diversified. They not only absorb the luxury and style of chandeliers, but also adopt the ceiling-mounted installation method. It avoids the shortcomings of a small room that cannot accommodate large luxury lighting. The light body of the LED ceiling light is mounted directly on the roof and is suitable for overall lighting, usually used in the living room and bedroom. LED ceiling lights should pay attention to the following points during installation and use:


1. When installing the ceiling light in the masonry structure, the embedded bolts should be used, or fixed with expansion bolts, nylon plugs or plastic plugs. Wood wedges should not be used. And the bearing capacity of the above-mentioned fixing member should be matched with the weight of the ceiling light to ensure that the ceiling light is fixed firmly and reliably, and the service life thereof can be prolonged.



2. When fixing with expansion bolts, the bolt specifications should be selected according to the technical requirements of the product. The drilling diameter and the buried depth should be consistent with the bolt specifications.



3. The number of fixed light holder bolts should not be less than the number of fixing holes on the base of the light, and the diameter of the bolts should match the hole diameter; the lights with no fixed mounting holes on the base (self-punching during installation), each fixture is used for fixing The number of bolts or screws should not be less than 2, and the center of gravity of the light should match the center of gravity of the bolt or screw; only when the diameter of the insulation table is 75mm or less, it can be fixed by one bolt or screw.



4, LED ceiling lights can not be directly installed on flammable objects, some families for the aesthetic use of the paint after the three plywood lining behind the ceiling light, in fact, this is very dangerous, must take insulation measures; if the surface of the light is hot Insulation or heat dissipation measures should also be taken when combustibles are used.



5, LED ceiling light should also be checked before installation:
1 Lead to the cross section of the wire core of each luminaire, the copper core cord is not less than 0.4mm, the copper core is not less than 0.5mm, otherwise the lead must be replaced.

2 The connection between the wire and the light cap, the connection of the parallel wires between the light caps should be firm, and the electrical contact should be good, so as to avoid sparks between the wires and the terminals due to poor contact, and danger occurs.





Ninghai Haohua Company specializes in the manufacture and supply of LED Craft Light in China. It has a strong R&D team that can develop and produce products according to drawings or samples provided by customers; it can produce products of different shapes, sizes and weights; it has its own quality inspection system and Testing equipment to ensure product quality. For more information visit: https://www.nhhx.net